![]() ![]() If you prefer you can use an ext2 or ext3 formatted filesystem.įrom this file you can extract all you need to do a full restore of your device, both via jtag or via CFE. This will create a 16M file named MTDBLOCK (due to fat limitation). mnt # dd if=/dev/mtdblock0 of=/mnt/backup/mtdblock dev/mtd1 /dev/mtd_rgconf1 /dev/mtdblock3 /dev/mtdr3 dev/mtd0 /dev/mtd_rgconf0 /dev/mtdblock2 /dev/mtdr2 Now just copy the content of the flash in some files on the usb key. VFS: Can't find an ext2 filesystem on dev sda1. VFS: Can't find ext3 filesystem on dev sda1. Insert an USB flash key into the usb port of the router and mount the new device somewhere, for example in /mnt/backup Note: the first time you will not see Username, but if you write admin, router will request you the password.īusyBox v1.01 (2005.09.07-07:38+0000) Built-in shell (lash)Įnter 'help' for a list of built-in commands. ![]() To obtain the shell just digit system shell. You have only to wait and don't have to short-circuit RX and TX pin.Īt the login prompt use admin as username and password to get to the openrg Discus prompt.įrom the Discus prompt you can do a lot of useful things, but i've not explored it due to some lack of interest. Note, when you flash from jtag the BASE ADDRESS is 0x1E000000Ĭonnect the serial adapter and let the device complete the boot procedure. I don't understand the MaxSize value of some sections as they leave some space before the next section. More detailed information came from the discuss prompt: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |